HEIDENHAIN MSE 1000 - Manual (Page 56)

Software setup
MSEsetup configuration
56 Operating Instructions
7.4.9 Display formats
Display format settings are used to select the way measurements are formatted when
displayed in the Data screen and transmitted to the output file.
Selecting a display format applies the change to all channels in the MSE 1000 module
chain that use that format. Individual channels can be to set to a different format in the
Setup screen.
Available formats:
Display resolution
0.000005 ... 0.5
Radix
Decimal
Comma
Angle format
360
180 +/-
infinite +/-
360 +/-
Select display formats To select Display formats:
Click the «Display formats» button.
Display formats options are displayed at the top of the screen.
Click the «Display resolution» drop down arrow and select a display resolution.
The updated setting is displayed in the Display resolution drop down box. A
message verifying the action is displayed in the message area.
Click the «Radix» drop down arrow and select the radix type.
The updated setting is displayed in the Radix drop down box. A message verifying
the action is displayed in the message area.
Click the «Angle format» drop down arrow and select an angle format.
The updated setting is displayed in the Angle format drop down box. A message
verifying the action is displayed in the message area.