HEIDENHAIN ND 720 v.3 - Manual (Page 66)

66
External
Operation
via
RS-232-C/V.24
Data
Interface
External Operation via RS-232-C/V.24 Data Interface
You can operate the display unit over the RS-232-C/V.24 data
interface using an external device.
The following commands are available on the ND 720 /
ND 760:
Format:
TXXXX Key is pressed
AXXXX Output of screen contents
SXXXX Special function
Sequence of commands Meaning
T0000 ‘0‘ key
T0001 ‘1‘ key
T0002 ‘2‘ key
T0003 ‘3‘ key
T0004 ‘4‘ key
T0005 ‘5‘ key
T0006 ‘6‘ key
T0007 ‘7‘ key
T0008 ‘8‘ key
T0009 ‘9‘ key
T0100 ‘CL‘ key
T0101 ‘-‘ key
T0102 ‘.‘ key
T0104 ‘ENT‘ key
T0107 ‘1/2‘ key (datum)
T0109 ‘X‘ key
Sequence of commands Meaning
T0110 ‘Y‘ key
T0111 ‘Z‘ key (only ND 760)
T0129 ‘SPEC FCT‘ key
T0142 ‘R+/-‘ key
T1000 ‘CE+0‘ keys
T1001 ‘CE+1‘ keys
T1002 ‘CE+2‘ keys
T1003 ‘CE+3‘ keys
T1004 ‘CE+4‘ keys
T1005 ‘CE+5‘ keys
T1006 ‘CE+6‘ keys
T1007 ‘CE+7‘ keys
T1008 ‘CE+8‘ keys
T1009 ‘CE+9‘ keys
A0000 Output of model designation
A0100 Output of 14-segment display
A0200 Output of current value
A0301 Output of error text
A0400 Output of software number
A0900 Output of indicators
S0000 Counter RESET
S0001 Lock keyboard
S0002 Unlock keyboard
Bateil2.pm6 27.03.2002, 12:09 66