HEIDENHAIN ND 720 v.3 - Manual (Page 20)

20
Tool
C
ompensation
Tool Compensation
You can enter the axis, length and diameter of the current tool.
Select the special functions.
TOOL DIAM.
2 0
Enter the tool diameter, e.g. 20 mm,
and confirm with ENT.
TOOL AXIS
Z
Set the tool axis.
SPEC
FCT
ENT
TOOL DATA
ENT
Confirm tool data input mode.
Select “tool data”.
SPEC
FCT
TOOL LENGTH
0 ENT 5
TOOL AXIS
Exit the special functions.
•
•
•
SPEC
FCT
or
CL
or
1)
1) only with ND 760
Enter the tool length, e.g. 50 mm,
and confirm with ENT.
Bateil1.pm6 07.11.2001, 10:36 20