HEIDENHAIN ND 720 v.3 - Manual (Page 25)

25
Bolt
H
ole
Circles/Bolt
H
ole
Circle
S
egments
Enter the total hole depth, e.g. –5 mm, and
confirm with ENT.
HOLE DEPTH
5
START
ENT
Start the display of the hole positions.
After the start, the distance-to-go mode becomes
active (the D symbol lights). The hole number is
shown briefly in the X axis. The individual holes
are reached by traversing to zero. The holes can
be selected with the ENT key or the 1 2 key.
If you press the minus key, the hole number is
shown again.
ENT
ENT
Exit the bolt hole circle function.
SPEC
FCT
or
CL
1)
1) only with ND 760
Bateil1.pm6 07.11.2001, 10:36 25