HEIDENHAIN ND 720 v.3 - Manual (Page 39)

39
Operating
Parameters
P50 Baud rate 1)
110 / 150 / 300 / 600 / 1200 / 2 400 / 4 800 / 9600 /
19 200 / 38 400
P51 Line feeds for measured value output 1)
Input range: 0 to 99
Default setting: 1
P70 Number of datum points
2 datum points
2 DATUM PT.
9 datum points 9 DATUM PT.
P80 Function of the CL key
Set to zero with CL
CL....RESET
No set to zero with CL
CL......OFF
P81 Function of the R+/- key
The R+/- key divides the actual
R+/- 1/2 ON
value by two.
The actual value is not divided.
R+/- 1/2 OFF
P96 Measured value output for probing
Measured value output active
PROBE ON
Measured value output not active PROBE OFF
1) User parameter
P97 Characters for measured values
ASCII characters for designation of the measured values for
output through probing, contact, or pulse.
Input range: 0 to 127
No ASCII character 0
ASCII character from ASCII table 1 to 127
P98 Conversational language 1)
German LANGUAGE DE
English
LANGUAGE EN
French LANGUAGE FR
Italian LANGUAGE IT
Dutch LANGUAGE NL
Spanish
LANGUAGE ES
Danish LANGUAGE DA
Swedish LANGUAGE SV
Finnish LANGUAGE FI
Czech
LANGUAGE CS
Polish LANGUAGE PL
Hungarian LANGUAGE HU
Portuguese LANGUAGE PT
Bateil2.pm6 27.03.2002, 12:09 39