HEIDENHAIN TNC 370D - Manual (Page 37)

Internal wiring of contacts to permissive buttons and EMERGENCY STOP button of the HR 410:
Right Left
The plug-in terminal strips are included in delivery with the adapter cable. If you have an immediate
need for these terminal strips before the adapter cable, they can be ordered separately:
Plug-in terminal strip, 3-pin
Id. Nr. 266 364 06
Plug-in terminal strip, 4-pin Id. Nr. 266 364 12
HR 130 Panel-Mounted Handwheel
The HR 130 is the panel-mount version of the HR 330 without axis keys, rapid traverse keys, etc. It
is connected to the logic unit directly or by extension cable.
The HR 130 is available in various versions (standard cable length 1 meter):
· Small knob, axial cable outlet:
Id. Nr. 254 040 01
· Small knob, radial cable outlet: Id. Nr. 254 040 02
· Large knob, axial cable outlet: Id. Nr. 254 040 03
· Large knob, radial cable outlet: Id. Nr. 254 040 04
· Ergonomic knob, radial cable outlet: Id. Nr. 254 040 05
(See also the "Dimensions" section in the Appendix)
Extension cable Id. Nr. 281 429 .. HR 130 Id. Nr. 254 040 ..
D-sub connector
(male) 9-pin D-sub connector
(female) 9-pin
D-sub connector
(male) 9-pin
Housing Shield Housing Housing Shield
2 White 2 2 White
4 Brown 4 4 Brown
6 Yellow 6 6 Yellow
8 Green 8 8 Green
7 Gray 7
3–34 TNC 370 D Mounting and Electrical Installation July 02