Grass Valley Performer SD - Manual (Page 35)

2-3
Installation Overview
Button Labeling
Film chips imprinted with standard source names and clear
button caps are included with Performer. Select names which suit
your requirements and install the chips and caps as illustrated.
NOTE: Tally Board and Looping Cable Option .If you order the
Performer and the Tally Board or Looping Cable Option at the same time,
the board is installed at the factory. If you order the Tally Board or
Looping Cable Option later, see the Installation Reference section and
install it as described.
If the factory settings meet your requirements and you are not installing
a Tally Board or Looping Cable Option, go to Rack-Mounting the
Performer
in this section to begin frame installation. If you wish to
make changes in the factory configuration or learn more about potential
settings, go to the Installation Reference section.
INPUT SELECTION
STATUS DISPLA
Y
VTR
27
360Mb
270Mb
177Mb
143Mb
AUTO
DIREC T
V A1 CH1/2 A2 CH1/2
Install caps so that the
“fingernail” slots are at top
and bottom.
Film Chip