Grass Valley Performer SD - Manual (Page 135)

3-17
TEN-XL Control Panels Operation
General Operation
In X–Y Mode, the TNX-SCP will control as many as ten
Performers. Each Performer must be assigned a unique address
from 0 to 9. Gaps in the address sequence are allowed, i.e., you
may have a Performer at address 0, one at address 3, etc.
In X–Y Mode the left row of SCP buttons selects a source while the
right button row selects one of ten switchers upon which that
source selection will be made.
Audio Follow Video Source Selection
To make an audio follow video source selection:
■ Press the button of the desired switcher
■ Press the button of the desired source
All levels of the selected source (video and audio) will be taken to
the selected switcher’s output. The LED in the center of the
buttons will light to indicate they are active.
Grass Valley Group SERIAL CONTROL PANEL
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
TEN X L
10
Source Selection Buttons
Error Indicator
Breakaway Buttons
Power Indicator
Switcher Selection Buttons
Addresses 0 through 9