Grass Valley Performer SD - Manual (Page 129)

3-11
TEN-XL Control Panels Operation
The video and audio levels of the selected source will be routed to
the switcher output. The red and green LEDs of the selected
source button will light.
Breakaway Source Selection
To make a breakaway source selection:
■ Press and hold the audio or video breakaway button (as
desired)
■ Press the button of the desired source
The source LED associated with your selection (audio or video)
will light. The selected source (audio or video level only) will be
taken to the switcher output along with the unchanged level of the
previously-selected source.
15
Red Video-Only
Green Audio-Only
VIDEO AUDIO
ONLY
Source Selection
Typical TEN-X Breakaway Panel Buttons
(arrangement may vary)