Grass Valley Performer SD - Manual (Page 133)

3-15
TEN-XL Control Panels Operation
Audio Follow Video Source Selection
To make an audio follow video source selection for either of the
switchers controlled by the panel:
■ Press the source selection button of the desired source
All levels of the selected source (video and audio) will be directed
to the switcher output. The LED in the center of the button will
light to indicate its levels are active.
Breakaway Source Selection
To make a breakaway selection for either switcher:
■ Press and release the video or audio breakaway button as
desired
The LED in the center of the selected breakaway button will light,
indicating the panel is in breakaway mode.
■ Press the selection button of the desired audio or video
source
Only the selected level (audio or video) of the source will be
routed to the switcher output. The panel will then exit breakaway
mode. If you wish to exit breakaway mode before making a
selection, simply press the breakaway button a second time. It is
also possible to press and hold the breakaway button while
making breakaway selections for both switchers controlled by the
panel.