Grass Valley Performer SD - Manual (Page 143)

3-25
TEN–20, 20–TEN Control Panels Operation
XYCP Control Panel
X–Y control panels provide selective front panel control of all
sources and destinations on their control bus. Any source to
destination configuration may be protected, and any immediately
preceding preset configuration can be recalled with the push of a
button.
The panel allows:
■ Presetting Destinations
■ Presetting Sources
■ Performing takes (source to destination routing)
■ Last (recall) function
■ Protect function
■ Performer has three levels. Level 4 of the X-Y control
panel is not used.
Presetting Destinations
To preset a destination:
■ Press the DESTINATION button
The display will load with dashes awaiting entry.
■ Enter the number of the desired destination using the
numeric buttons
The number will load into the destination display and flash to
indicate that you may still edit it without disturbing existing
source to destination selections. To edit, you may enter a new
number (overflowing the display) or you may press CLEAR and
begin again.
Grass Valle Gro p
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 DESTINATION
PROTECT
TAKE
CLEAR
LAST
0 1 2 3 4
5 6 7 8 9