Grass Valley Performer SD - Manual (Page 13)

xi
Safeguards and Notices
North American Power Supply Cords
This cord is supplied with a molded grounding plug (NEMA 5-
15P) at one end and a molded grounding connector (IEC 320-C13)
at the other. Conductors are CEE color coded, light blue (neutral),
brown (line), and green/yellow (ground). See the illustration.
Operation of this equipment at voltages exceeding 130 VAC will
require power supply cords which comply with additional
NEMA guidelines.
International Power Supply Cords
This cord is supplied with a molded grounding connector (IEC
320-C13) at one end and stripped conductors (50/5 mm) at the
other. Conductors are CEE color coded, light blue (neutral),
brown (line), and green/yellow (ground). Other IEC 320 C-13
type power supply cords can be used if they comply with the
safety regulations of the country in which they are installed. See
the illustration.
NOTE: When used in the United States, this cord is for 100 - 130VAC
use only.
When used internationally, this cord is for 100 - 130VAC or
200 - 240VAC (one line, one neutral, one earth).
Blue
Green with
Yellow stripe
Brown
Line
Neutral
Ground
(Earth)