Grass Valley Maestro Master Control v.1.7 - Manual (Page 47)

Maestro — Channel Branding User Guide 43
Modifying a Branding Source
3. Press the SEL key above the LCD button for the source which you wish
to modify. See
Figure 8 .
4. Press the Menu button.
5. Rotate the left knob until the KEY POS: option appears in the window
at the bottom of the Keyer Control panel if it does not already appear
(
Figure 9 ).
Figure 9. Key Position Menu Option
6. Press the Menu button to select the KEY POS: menu option.
The display changes as illustrated in Figure 10 to show the current hori-
zontal (in pixel) and vertical (in lines) position of the key.
Note The number of available pixels and lines for positioning a key are determined
by the video standard assigned to the Maestro channel processor. The
numbers in the LCD windows refer to the number of horizontal pixels from
the upper left corner of the screen to the upper left corner of the key and the
number of vertical lines from the upper left corner of the screen to the upper
left corner of the key.
Figure 10. Key Horizontal and Vertical Position
7. Rotate the knobs for horizontal and vertical position as needed to
position the key in the preferred on-screen location. Position changes
may be noted on the PST monitor.