Grass Valley Maestro Master Control v.1.7 - Manual (Page 170)

166 Maestro Channel Branding User Guide
Section 5 — The Maestro Configuration Editor
Tally Relay Table
Make an entry for each tally light, as described in the manual.
Tally Dependency Table
For the Tally Dependency Table, refer to the section “Configuration for
Systems with a Non-Saturn Master Control Switcher.”
As described in the Jupiter manual, each opto-isolator input of the MI-
3040 is associated in this table with the corresponding router output.
For example, if Maestro “Bus A” has been associated with GPIO 1 (as
shown on
page 164 ), and GPIO 1 has been wired to MI-3040 opto 0, then
the Tally Dependency Table will be used to associate opto 0 with the
router output that is wired to Bus A.