Grass Valley Maestro Master Control v.1.7 - Manual (Page 42)

38 Maestro — Channel Branding User Guide
Section 3 — Branding User Operations
Figure 6. Input Table with Branding Elements Added
Branding elements are considered to be “Internal” sources. These source
elements are stored on the Channel Branding hard drives that are located
on the Maestro Channel Processor board. When a Branding element is
added to the Input table, the video and audio sources are highlighted in
green to indicate they are internal sources (see
Figure 6 ).
Note The ability to highlight Sources in colors that designate the Source type is
active only if the “Enable source type color coding” check box is selected in
the lower part of the Input table. See
Figure 6 .
Only the branding elements that are defined in the Input table will be avail-
able to the channels that utilize that specific Input table. This utilization
makes it possible to create different Input tables for different Maestro chan-
nels that have different branding content.
Branding Element Source Assignment
The assignment of an internal Branding element to either a video keyer or
to an audio over mixer is done the same way as assigning an external