Row editing, Saving – Grass Valley Maestro Master Control v.1.7 User Manual
Page 108
104
Maestro Channel Branding User Guide
Section 5 — The Maestro Configuration Editor
When creating a name for a Maestro configuration file, it’s a good practice
to use letters and numbers only. See the
Configuration Set Naming Rules
section on
, if you want to use punctuation.
Error Detection and Explanation
- Fields that contain insufficient or inap-
propriate information are flagged. An error message will appear on the
bottom of the window with the error type highlighted in red. See
.
Figure 82. Example Error Message
Row Editing
•
To add a row (or rows) at the bottom of a table, position the cursor any-
where within the table, right-click, and select “Add Row(s).”
•
To add one row on the bottom of the table, press INSERT.
•
To clear a row of user data, select the blank box on the left end of the
row. Right-click and select Cut.”
•
To clear a row of all data, press DELETE. To delete the row entirely,
right-click and select “Delete Row(s).”
Saving
•
Press
"Apply"
to save the changes in memory (they are not saved to disk
until you select File > Save). If you attempt to close the Configuration
File before applying your changes, a pop up message will appear
asking you to confirm or abandon the changes before editing a new file.
•
You can exit without writing even after changes have been Applied and
the table closed by selecting "File > Exit." and answering "No" to the
"Save?" question.