Grass Valley Maestro Master Control v.1.7 - Manual (Page 153)

Maestro Channel Branding User Guide 149
5th Step: Input/Output Sets
Video Standard
The Video Standard will appear if applicable.
Video and Audio Levels
Includes check boxes for all of the supported video and audio levels (V, A1-
A16). These check boxes are automatically selected when an element is
selected in the Source Name field. These levels are based on the selections
that were set in the Levels definition in
2nd Step: Definition .
5th Step: Input/Output Sets
The 5th Step: Input/Output Sets:
• Input
• Interconnection
• GPIO Definition
• Monitor Follow
Each of these steps is described below.
Input
This table defines which router inputs are available to the Maestro, and
specifies the Category/Number button combination that will appear on
the Source Assign keypad.
When the Input table is first opened, create a name for the set, select the
preferred configuration set dependencies, and then select the “New”
option. (The set is assigned to a channel using the Channel Setup table,
page 201 .)
An example of an Input set is shown in Figure 115 . In this example, all
inputs or sources are either External, Embedded, or Direct. See the Enable
source type color coding section of the interface.