beautypg.com

System requirements for a client pc, Step 1: physical setup – Grass Valley Kaleido-Modular-X v.7.70 User Manual

Page 9

background image

5

Kaleido-Modular-X

Quick Start Guide

• A dedicated 100Base-T Ethernet switch with enough ports for the KMX-3901-OUT

output cards, the housing frames’ Densité CPU-ETH2 controller cards, client PCs,
Kaleido-RCP2 units, and Audio Bridge Terminals

• Client PC (see below for system requirements)

• Cables (to connect your multiviewer to video sources, to displays, and to the network):

System Requirements for a Client PC

A client PC or laptop meeting the following requirements is required to access the XAdmin
Web client, and the other Kaleido-X client applications.

Step 1: Physical Setup

To set up the Kaleido-Modular-X hardware

1 Install your Densité 3 and Densité 3+ FR1 housing frames in their designated rack

position, if they are not installed already (refer to the appropriate manuals for your
frames: the Densité 3+ FR1 User Manual, or the Densité 3 Housing Frame Guide to
Installation and Operation,
available from the Grass Valley support portal).

Cable type

Purpose

CAT-5

For Ethernet connectivity

Display cables

To connect the multiviewer’s HDMI outputs to displays:
• Standard HDMI cables
• Extension modules—for example, Grass Valley’s DXF-200

DVI/HDMI Optical Extension System:
• part number DXF-200-B, for output cards with a double

rear connector panel (KMX-3901-OUT-D-3DRP)

• part number DXF-200-C, for output cards with a single

rear connector panel (KMX-3901-OUT-D-3+SRP)

To connect the multiviewer’s SDI outputs to displays:
• Standard coaxial cables with DIN 1.0/2.3 connectors
• SDI to HDMI 2.0 (or SDI to DisplayPort) converter—for

example, AJA’s Hi5-4K Mini-Converter (firmware version
2.2 or later)

Video cables

Standard coaxial cables with DIN 1.0/2.3 connectors

Note:

On all Kaleido multiviewers, the network adapters are set to auto-

negotiate. By default, the connection speed and duplex mode will be set
automatically based on the corresponding port settings on the switch.

Operating system

Windows XP Professional, Windows 7, Windows 8, or Windows 8.1

Processor

Core 2 Duo at 2 GHz, or better

Memory

At least 2 GB of RAM

Disk space

At least 2 GB free