Grass Valley Kaleido-Modular-X v.7.70 - Manual (Page 19)

15
Kaleido-Modular-X
Quick Start Guide
FlexBridge wiring for a 32 × 2 system
To connect the input and output cards in a Kaleido-Modular-X 32 × 2
1 Complete the bridging for a 16 × 2 configuration (see FlexBridge wiring for a 8 × 2 or 16
× 2 system , above).
2 Bridge Input B to Input A, by connecting:
• INPUT B FLEXBRIDGE OUT A1 to INPUT A FLEXBRIDGE IN A1
• INPUT B FLEXBRIDGE OUT A2 to INPUT A FLEXBRIDGE IN A2
Rear panels for a KMX-3901-IN-8-D (left), and
KMX-3901-OUT-D (double panel shown on
right). The Flexbridge connectors are the
same on the KMX-3901-IN-8-D and
KMX-3901-IN-16-D card’s rear panels, and on
the output card’s single and double rear
panels.
INPUT A OUTPUT A
INPUT B INPUT A OUTPUT A