Grass Valley Kaleido-Modular-X v.7.70 - Manual (Page 20)

16
Setting Up Your Kaleido-Modular-X System
Physical Setup
FlexBridge wiring for a 48 × 2 system
To connect the input and output cards in a Kaleido-Modular-X 48 × 2
1 Complete the bridging for a 32 × 2 configuration (see FlexBridge wiring for a 32 × 2
system , above).
2 Bridge Input C to Input B, by connecting:
• INPUT C FLEXBRIDGE OUT A1 to INPUT B FLEXBRIDGE IN A1
• INPUT C FLEXBRIDGE OUT A2 to INPUT B FLEXBRIDGE IN A2
FlexBridge wiring for a 64 × 2 system
To connect the input and output cards in a Kaleido-Modular-X 64 × 2
1 Complete the bridging for a 48 × 2 configuration (see FlexBridge wiring for a 48 × 2
system , above).
2 Bridge Input D to Input C, by connecting:
• INPUT D FLEXBRIDGE OUT A1 to INPUT C FLEXBRIDGE IN A1
• INPUT D FLEXBRIDGE OUT A2 to INPUT C FLEXBRIDGE IN A2
FlexBridge wiring for a 16 × 4 system
To connect the input and output cards in a Kaleido-Modular-X 16 × 4
1 Bridge Input A to Output A, by connecting:
• INPUT A FLEXBRIDGE OUT A1 to OUTPUT A FLEXBRIDGE IN 1
• INPUT A FLEXBRIDGE OUT A2 to OUTPUT A FLEXBRIDGE IN 2
2 Bridge Input A to Output B, by connecting:
• INPUT A FLEXBRIDGE OUT B1 to OUTPUT B FLEXBRIDGE IN 1
• INPUT A FLEXBRIDGE OUT B2 to OUTPUT B FLEXBRIDGE IN 2
INPUT A OUTPUT A