Grass Valley Kaleido-Modular-X v.7.70 - Manual (Page 22)

18
Setting Up Your Kaleido-Modular-X System
Physical Setup
FlexBridge wiring for a 48 × 4 system
To connect the input and output cards in a Kaleido-Modular-X 48 × 4
1 Complete the bridging for a 32 × 4 configuration (see FlexBridge wiring for a 32 × 4
system , above).
2 Bridge Input C to Input B, by connecting:
• INPUT C FLEXBRIDGE OUT A1 to INPUT B FLEXBRIDGE IN A1
• INPUT C FLEXBRIDGE OUT A2 to INPUT B FLEXBRIDGE IN A2
• INPUT C FLEXBRIDGE OUT B1 to INPUT B FLEXBRIDGE IN B1
• INPUT C FLEXBRIDGE OUT B2 to INPUT B FLEXBRIDGE IN B2
FlexBridge wiring for a 64 × 4 system
To connect the input and output cards in a Kaleido-Modular-X 64 × 4
1 Complete the bridging for a 48 × 4 configuration (see FlexBridge wiring for a 32 × 4
system , above).
2 Bridge Input D to Input C, by connecting:
• INPUT D FLEXBRIDGE OUT A1 to INPUT C FLEXBRIDGE IN A1
• INPUT D FLEXBRIDGE OUT A2 to INPUT C FLEXBRIDGE IN A2
• INPUT D FLEXBRIDGE OUT B1 to INPUT C FLEXBRIDGE IN B1
• INPUT D FLEXBRIDGE OUT B2 to INPUT C FLEXBRIDGE IN B2
INPUT B INPUT A OUTPUT A OUTPUT B