beautypg.com

Verifying an input card’s application version, Rring to, Verifying an output card’s ip – Grass Valley Kaleido-Modular-X v.7.70 User Manual

Page 50: Address and application version

background image

46

Setting Up Your Kaleido-Modular-X System

System Verification

FRAME IP ADDRESS EDIT appears on the control panel’s display.

3 Press the SEL button again.

The current system IP address appears on the display. This is your system’s virtual
IP address (i.e., the address you will use to access your system from XEdit and XAdmin).

4 Press the Select button on the front edge of the output card to exit the control menu.

Verifying an Output Card’s IP Address and Application Version

To verify the IP address and application version on an output card

1 Press the Select button on the front edge of the Kaleido-Modular-X output card.

The Status LED on the selected card flashes orange, and the associated control menu
appears on the display of the Densité frame’s local control panel.

2 Note the position indication A or B in the card information shown on the first line of the

LCD display: either KMX-OUTA, or KMX-OUTB, followed with the slot number (e.g., KMX-
OUTA Slot 4).

3 On the local control panel, press the [–] button.

The version of the Kaleido-X Software that is running on the card (e.g. “7.10-
build.5201”) appears on the display.

4 On the local control panel, press the [–] button repeatedly until NETWORK SETTINGS

appears on the display, and then press the SEL button.

FRAME IP ADDRESS EDIT appears on the control panel’s display.

5 If the card was identified as KMX-OUTA on the display, then press the [–] button

repeatedly until OUTPUT A IP EDIT appears. If the card is identified as KMX-OUTB, then
press the [–] button until OUTPUT B IP EDIT appears.

6 Press the SEL button.

The current IP address for this card appears on the display.

7 Press the Select button on the front edge of the output card to exit the control menu.

Verifying an Input Card’s Application Version

To verify the application version on an input card

1 Press the Select button on the front edge of the Kaleido-Modular-X input card.

Note:

If you have a single- or dual-head Kaleido-Modular-X multiviewer,

then this IP address doubles as the system IP address.