Grass Valley Intuition XG v.5.0 - Manual (Page 99)

5-36 Intuition XG Configuration Guide
Dashboard - Intuition XG’s Local Configuration Software
Hardware Settings > Audio page
The Audio page is a sub-page of the Hardware Settings tab, which is only visible when a
Vertigo hardware device is selected in the Dashboard’s device list. The Audio page (figure
5-16 ) exposes parameters that allow you to set the Vertigo device’s audio processing.
Figure 5-16. The Audio page within Dashboard’s Hardware Settings
I NPUT The Intuition XG can be configured to capture only embedded audio, only
discrete audio, or a combination of both. Use the slider to select the
following settings:
• E MBEDDED ONLY : Specifies that the audio input signal is embedded
in the video signal (SDI), rather than a discrete (AES) audio signal
(separate from the video signal).
• 1 PAIR AES + 7 PAIRS EMBEDDED
• 2 PAIRS AES + 6 PAIRS EMBEDDED
• 3 PAIRS AES + 5 PAIRS EMBEDDED
• 4 PAIRS AES + 4 PAIRS EMBEDDED
• AES O NLY : Specifies that the audio input signal is discrete (AES),
rather than being embedded (SDI) in the video signal.
• O FFSET ( FIELDS ): Adds additional delay to the time it takes audio to be
captured at the input and then output again.