Grass Valley Intuition XG v.5.0 - Manual (Page 24)

Intuition XG Configuration Guide 2-11
Overview of the Intuition XG’s Hardware
Rear panel components (Intuition-XG-3U-e / Dual-e)
The Intuition XG’s rear panel features convenient access to the video card’s I/O connector,
which provides up to 4 SD/HD SDI video outputs, a reference signal input, and AES audio
input/output. The rear panel also provides access to the graphics card connector, as well
as various I/O ports (RS-422, USB, Ethernet...etc.).
The table following the figure 2-2 describes the function of each connector on the rear panel
of the Intuition XG chassis.
Figure 2-4. The Intuition XG’s rear panel components
Mouse & Keyboard
connectors The two (2) PS/2 connectors on the rear panel allow you to connect a
mouse and keyboard to the Intuition XG device. These peripherals are
required during the device’s initial configuration, which involves using
the Intuition XG’s desktop applications, including Dashboard.
Note that if the mouse or keyboard has a UBS connector, you can
connect them to the USB 2.0 connectors on the front or rear panels of
the Intuition XG device.
Power Supply Modules (2)
RS-422 Connectors
USB 2.0
Network Ethernet
Connectors (2)
SDI Video Card
Connectors (4)
I/O Connector
Graphics Card
System Fans (2)
Serial
RS-232 Ports (2)
Mouse
Keyboard
Connectors (2)
(option)
Audio I/O Ports
(Disabled)
Discrete Audio
Connectors (2)
(option)
Connector
Connector
GPI Card Connector
(option)
Time Code
Card
LTC IN
LTC
IN