Grass Valley Intuition XG v.5.0 - Manual (Page 108)

Intuition XG Configuration Guide 5-45
Dashboard - Intuition XG’s Local Configuration Software
S AVE / C ANCEL buttons The S AVE button saves the mixing profile matrix, and any changes
that where made to the matrix values or structure, by associating it
with a number in the Profile ID list.
The C ANCEL button allows you to exit the Audio Mixing Profile dialog
box without saving any of the changes made to the mixing
matrixes/profiles.
A DD S OURCE command Use the A DD S OURCE command to add an additional source channel
to a predefined mix matrix. The A DD S OURCE command is accessed
by right-clicking anywhere within the matrix and selecting A DD
S OURCE from the command list.
A DD D ESTINATION command Use the A DD D ESTINATION command to add an additional destination
channel to a predefined mix matrix. The A DD D ESTINATION command
is accessed by right-clicking anywhere within the matrix and selecting
A
DD D ESTINATION from the command list.
D UCK command The D UCK command enables a technique for attenuating the audio
coming in on the “ducked” channel, to make room for another signal
to dominate. For example, the music coming in on a channel will
lower when a voice over is introduced.
Ducking is automatically enable when mixing is enabled (value > 0).
You can also manually set the ducking command when the mixing
value is set to zero (0 indicating no audio mixing to that channel). The
D
UCK command is accessed by right-clicking the destination channel
heading and selecting from the command list. When ducking is
enabled, the destination channel’s heading turns blue.