Grass Valley Intuition XG v.5.0 - Manual (Page 30)

Intuition XG Configuration Guide 2-17
Overview of the Intuition XG’s Hardware
Video input/output channels
Depending on the model, Intuition XG devices offer one or two video SD/HD input channels
with one or two video SD/HD fill and key output channels. Figure
2-6 and the following table
identifies and describes the Intuition XG video card’s input and output connections,
including the hardware bypass.
Figure 2-6. The Intuition XG video card’s input and output connections
Pin/Channel Name Description
SDI IN A SDI IN A is the primary input channel connection.
SDI In B SDI IN B acts as a separate input channel on the Intuition-XG-Dual-e model.
ANALOG REF IN Analog Ref In is the input reference signal used by the Genlock hardware to
synchronize the phase timing video and graphics processing.
ANALOG REF
LOOP OUT Analog Ref Out loops the signal that comes in through the Analog Ref In
channel.
SDI OUT A SDI OUT A (Fill 1) is the primary output channel connection.
Video breakout cable
SDI IN A
SDI IN B
ANALOG REF IN
ANALOG REF LOOP OUT
SDI OUT A (Fill 1)
SDI OUT B (Fill 2)
SDI OUT C / KEY
SDI OUT D / KEY H/W Bypass
H/W Bypass
Channel 1
Channel 2
SDI Video Card I/O Connector
SDI Video Card I/O Connector
LTC
IN
SDI Video Card I/O Connector