Grass Valley Intuition XG v.5.0 - Manual (Page 84)

Intuition XG Configuration Guide 5-21
Dashboard - Intuition XG’s Local Configuration Software
Resolution page
The Resolution page (figure 5-9 ) provides access to the device parameters that set the
input, rendering, and output resolution of the video data.
Figure 5-9. The Resolution tab and page on the Dashboard window
I NPUT R ESOLUTION This parameter is only available to Vertigo hardware devices (not the
software CG).
The Input Resolution parameter allows you to select the input resolution of
the video data prior to processing by Vertigo device. Select a resolution
format from the drop-down list of preset formats that are compatible with the
rendering resolution.
• NTSC: Sets the rendering resolution to NTSC format
(720 x 486) Rate: 29.97
• NTSC_W IDE : Sets the rendering resolution to
NTSC-Wide format (800 x 486) Rate: 29.97
• PAL: Sets the rendering resolution to PAL format
(720 x 576) Rate: 25
• PAL_W IDE : Sets the rendering resolution to PAL-Wide
format (800 x 576) Rate: 25
• 720 P 60: Sets the rendering resolution to 720p60 format
(1280 x 720) Rate: 60
• 720 P 60M: Sets the rendering resolution to 720p60M
format (1280 x 720) Rate: 59.97
• 1080 I 25: Sets the rendering resolution to 1080i25 format
(1920 x 1080) Rate: 25
• 1080 I 30M: Sets the rendering resolution to 1080i30M
format (1920 x 1080) Rate: 29.97
• 1080 I 30:Sets the rendering resolution to 1080i30 format
(1920 x 1080) Rate: 30
• 1080 I 24M: Sets the rendering resolution to 1080i24m
format (1920 x 1080) Rate: 23.98