Grass Valley Intuition XG v.5.0 - Manual (Page 97)

5-34 Intuition XG Configuration Guide
Dashboard - Intuition XG’s Local Configuration Software
Hardware Settings > Video page
The Video page is a sub-page of the Hardware Settings tab, which is only visible when a
Vertigo hardware device is selected in the Dashboard’s device list. The Video page (figure
5-15 ) exposes parameters that allow you to set the Vertigo device’s video input/output
channels and video processing options.
Figure 5-15. The Video page within Dashboard’s Hardware Settings
I NPUT C HANNELS Specifies the input channel of the hardware to use. Depending on the
hardware configuration of the machine, the possible values are blank, A, or
B.
When running a single instance of the Vertigo device, both sources can be
used. But when running two instances of the device simultaneously, they
must each use a different input channel. In the case where there are more
instances running than input channels, some will have to leave the setting
blank.
O UTPUT C HANNELS Specifies the output channel of the hardware to use. Depending on the
hardware configuration of the machine, the possible values are A, B, C, or
D. When running multiple instances of the Vertigo device simultaneously,
each instance must specify a different output channel. This parameter can
also be set using the Output Channel field on the Device Profile page (
page
5-15 ).
B IT C OUNT Specifies the bit depth of the signal. Choose either 8 or 10 (default) from the
drop-down list.