Grass Valley Intuition XG v.5.0 - Manual (Page 56)

Intuition XG Configuration Guide 4-7
Intuition XG Portal - Intuition XG’s Remote Configuration Tool
Restarting the Intuition XG device remotely
The Intuition XG Portal allows you to restart an actively running Intuition XG device from a
remote workstation using the R
ESTART S YSTEM command in the M AINTENANCE menu.
N OTE
The Intuition XG device must be operating for the Intuition XG Portal to be available.
Therefore, once the Intuition XG device is shutdown, you can no longer use the Intuition XG
Portal to configure or restart the device.
To restart the Intuition XG device using the Intuition XG Portal:
1.
Log into the Intuition XG’s Portal (see page 4-2 ).
2. Select the M AINTENANCE >S YSTEM R ESTART command.
The Portal’s S YSTEM R ESTART page appears (figure 4-6 ).
Figure 4-6. The Intuition XG Portal’s System Restart page
3. Click the R ESTART button to restart down the Intuition XG device.
A window appears asking you to confirm that you want to restart the device.
4. Click OK to restart the device.
The Portal immediately returns to the Intuition XG Portal’s L
OGIN page.
Give the machine sufficient time to complete the reboot process and then log back into
the system (see
page 4-2 ).