Grass Valley Intuition XG v.5.0 - Manual (Page 100)

Intuition XG Configuration Guide 5-37
Dashboard - Intuition XG’s Local Configuration Software
O UTPUT • AES: Specifies that the audio output signal is discrete (AES), rather
than being embedded (SDI) in the video signal.
• E MBEDDED : Specifies that the audio output signal is embedded in the
video signal (SDI), rather than a discrete (AES) audio signal (separate
from the video signal).
• S TEREO P AIRS : Specifies the number of stereo pairs to be captured
from the current audio source.
• AV S YNC : Specifies the number of frames to shift the audio and video
output out of sync. A positive number delays the audio and a negative
number delays the video.
• B ITS PER S AMPLE : Specifies the bit depth of the audio signal. The
available values are 0, 16, 20, and 24. The default value is 0. Using a
value of 0 means that the device will automatically choose the bit-depth
based on the output format. For SD, it is 20 and for HD it is 24.
M IXING P ROFILES The following are the default mix profiles used for each type of object, like
clips, .wav file...etc. Type the Profile ID number to assign a mixing profile
from the Audio Mixing Profiles dialog box as the default mixing profile
(see
“Audio Mixing Profiles dialog box” on page 5-43 ).
• C LIP D EFAULT
• V OICE O VER D EFAULT
• M ULTI -T RACK C LIP D EFAULT
• A UDIO I NPUT A D EFAULT
• A UDIO I NPUT B D EFAULT
• E DIT P ROFILES button: Opens the Audio Mixing Profiles dialog box
(see “Audio Mixing Profiles dialog box” on page 5-43 ).
D ATA F ORMAT Declare the input audio format (PCM or RAW) at the startup of the
Intuition XG device. If set to PCM (default), the incoming audio stream is
guaranteed to be purely PCM, allowing the Intuition XG to apply audio
effects. If it is set to RAW, the Intuition XG is prevented from altering the
audio stream in any way, thus protecting the Dolby signal.