Grass Valley Intuition XG v.5.0 - Manual (Page 95)

5-32 Intuition XG Configuration Guide
Dashboard - Intuition XG’s Local Configuration Software
R ESOLUTION - C ONTINUED • NTSC_W IDE : Sets the rendering resolution to NTSC-Wide format
(800 x 486)
• PAL: Sets the rendering resolution to PAL format (720 x 576)
• PAL_W IDE : Sets the rendering resolution to PAL-Wide format
(800 x 576)
• 720 P 60: Sets the rendering resolution to 720p60 format
(1280 x 720)
• 720 P 60M: Sets the rendering resolution to 720p60M format
(1280 x 720)
• 1080 I 25: Sets the rendering resolution to 1080i25 format
(1920 x 1080)
• 1080 I 30M: Sets the rendering resolution to 1080i30M format
(1920 x 1080)
• 1080 I 30: Sets the rendering resolution to 1080i30 format
(1920 x 1080)
• 1080 I 24M: Sets the rendering resolution to 1080i24m format
(1920 x 1080)
• 1080 P 24: Sets the rendering resolution to 1080p24 format
(1920 x 1080)
• 1080 P 25: Sets the rendering resolution to 1080p25 format
(1920 x 1080)
• 1080 P 30M: Sets the rendering resolution to 1080p30m format
(1920 x 1080)
• 1080 P 30: Sets the rendering resolution to 1080p30 format
(1920 x 1080)
B IT C OUNT Specifies the bit depth of the genlock signal. Choose either 8 (default) or 10
from the drop-down list.
S TATUS & R EFRESH
button
Identifies the current state of the Genlock signal source that is selected in
the S
OURCE parameter.
• L OCKED : The connection is established and the on-board Genlock is
sending a clocking signal to the Genlock source specified in the Source
parameter.
• F REE R UNNING : No signal is coming in on the selected Genlock source,
or the specified signal formats are not the same. For example, if the
resolution setting on the Genlock page does not match the resolution
formats specified on the Resolution page.
• R ELOCKING : In the process of locking. Note that if continuously in this
state, the Genlock signal might not be stable and it needs to be
checked.