Grass Valley Intuition XG v.5.0 - Manual (Page 51)

4-2 Intuition XG Configuration Guide
Intuition XG Portal - Intuition XG’s Remote Configuration Tool
Accessing and logging into the Intuition XG Portal
Once the Intuition XG device is running and is properly connected to the LAN, you can
access the Intuition XG Portal from any client workstation that is connected to the network
using a standard graphical web browser, like Internet Explorer.
N
OTE
As a prerequisite to using the Intuition XG Portal, you must know that Intuition XG devices
IP address. Contact your network administrator for the device’s IP address, or take note of
it from the Intuition XG Control Panel (see
page 3-3 ).
To access and log into the Intuition XG Portal:
1.
Open a web browser (e.g. Internet Explorer) on a client workstation that is connected
to the same local network as the Intuition XG device.
2. Type the IP address or hostname of the Intuition XG device into the address bar of the web
browser (e.g. http://10.0.4.245 or http://xg-embedded3) and press E
NTER .
The Intuition XG Portal’s L OGIN page appears (figure 4-2 ).
Figure 4-2. The Intuition XG Portal’s Login page
N OTE
If the Intuition XG Portal’s L OGIN page does not appear, verify the IP address in the web
browser’s address bar for typographical errors. Other reasons that it might not appear are
that the Intuition XG device is not running, that it is not properly connected to the network,
or the network is down.
3. Log into the application by typing vertigo in the P ASSWORD text box and clicking the
L OGIN button.
The I NTUITION XG P ORTAL Home page appears (figure 4-3 ).
Figure 4-3. The Intuition XG Portal’s Home page