Grass Valley EDIUS Pro v.7.0 - Manual (Page 78)

Editing
70 EDIUS - User Guide
5 Click [Playback] or [Loop Playback] to check the video.
The video is displayed on the Recorder.
3
•
Even clips with no key added have one key each at the beginning and end.
• In the default time remap setting, the speed of the parts later than the set key changes smoothly. If you want to
maintain a fixed playback speed for a certain range, set the key to the range, right-click the key on the In point
side, and click [Linear]. The key changes the shape from diamond to square.
If you right-click a key to which linear change has been set and click [Speed], a dialog box for entering the play-
back speed appears.
• Click [Initialize] in the [Time Remap] dialog box and click [Yes] to delete all added keys and restore them to the
default.
One Frame at a Time Playback (Freeze Frame)
Play back the In or Out points of the clip with the motion stopped. Clips can be stopped for the length of the clip, and in
addition, the part before or after a desired frame can be stopped.
Freeze Frame at In or Out Point of Clip
0
1 Right-click on a clip, and click [Time Effect] → [Freeze Frame] → [Setup].
The [Freeze Frame] dialog box appears.
2 Check [Enable freeze frame].
3 Select the position to freeze, and click [OK].
When the In point is selected, the frame of the In point is freeze-framed for the length of the clip, and when the Out
point is selected, the frame of the Out point is freeze-framed for the length of the clip.
3
•
When a clip on which freeze frame is enabled is trimmed, operations differ as follows depending on the fixed
position.
- When the In point side of a clip with a fixed In point is trimmed, the displayed frame also moves along with the
trimming. Operation is not affected when the Out point side has been trimmed.
- When the Out point side of a clip with a fixed Out point is trimmed, the displayed frame also moves along with
the trimming. Operation is not affected when the In point side has been trimmed.
Freeze-framing Part before or after a Desired Frame
0
1 Move the timeline cursor to the frame to freeze.
2 Right-click on a clip, and click [Time Effect] → [Freeze Frame] → [Before Cursor] or [After Cursor].
The selected clip is cut at the timeline cursor position, and freeze frame is set to clips before or after the cursor. When
freeze frame has been set after a cursor, the fixed position becomes the In point, and when freeze frame has been set
before a cursor, the fixed position becomes the Out point.
1
Note
• Freeze frame cannot be set when a timeline cursor is located at a transition between clips.
Snapping Still Image from Timeline
You can snap a still image of any scene on the timeline as a file.