Grass Valley EDIUS Pro v.7.0 User Manual
Page 124
Other Convenient Functions
116
EDIUS -
User Guide
1 Click [Mode] on the menu bar, and click [Sync Point]
→ the sync point to set.
2 Map video source channels to V/VA tracks.
Setting Channel Mapping
Map video source channels to the track where clips are placed. When [Asynchronous] has been selected in step 1,
clips are placed on the tracks where video source channels are mapped; however, when another sync point has been
selected, clips are placed above the tracks where video source channels are mapped. If there is no space to place a
clip on the track, V track is automatically added.
3 Select multiple clips from the bin, and click [Add to Timeline] in the bin.
The clips are placed in accordance with the sync point selected in step 1.
The camera switch point is automatically set to the In and Out points of each clip.
Clips placed on the timeline are displayed on the Recorder in the multicam screen.
1
Note
• If there are not sufficient number of tracks when adding clips, a track is automatically added. In this case, only V track
is automatically added. Add VA tracks in advance when they are necessary.
4 Move the timeline cursor to the position to start playback.
5 Click the camera video of the clip to be enabled first.
6 Click [Play] on the Recorder.
[Asynchronous]
Place clips without space from the timeline cursor position of the track where
video source channel is connected in the sorting order of the bin.
[Timecode]
Place clips onto separate tracks based on the start timecode of each clip.
[Rec Time]
Place clips onto separate tracks based on the record time of each clip.
[Clip In]
Place clips onto separate tracks based on the In point timecode of the clips.
[Clip Out]
Place clips onto separate tracks based on the Out point timecode of the clips.