Trimming a clip, Trimming type, In point trim/out point trim – Grass Valley EDIUS Pro v.7.0 User Manual
Page 65: Ripple trim
57
Basic Editing Operations
EDIUS -
User Guide
Trimming a Clip
Trimming function allows fine adjustments of In and Out points of a clip placed on the timeline while viewing the video
on a window. You can also move the boundary between clips and In and Out points of video/audio separately.
Trimming operation is performed by cut points. Clicking on a point near the In or Out point of a clip shows yellow and
green lines. The yellow line appears at the currently selected point, and the green line appears on a point to be
changed by the trimming operation.
There are 3 major methods of trimming. Dragging a cut point in the standard mode, switching to the trim mode and
operating on the dedicated window that appears, and using shortcut keys.
See the Reference Manual for more details.
Trimming Type
Depending on the editing mode settings, the trimmed video appears different.
In Point Trim/Out Point Trim
0
Change the In and Out points of clips placed on the timeline. The edit result is dependent on the edit mode.
Example:
When trimming the Out point side of the clip (ripple mode off)
Ripple Trim
0
Change the In and Out points with the positional relationship with other clips maintained. Perform the trimming
operation with the ripple mode on. Even if the ripple mode is off, ripple trimming is possible by using combinations of
shortcut keys and keyboard operation.
Example:
When trimming the Out point side of the clip