Alinco DJ-X2000 - Manual (Page 84)

83
4.2 Troubleshooting
4.3 Optional items
The optional items available for the DJ-X2000 are listed below:
EBP-33N NiCd battery pack (4.8V 650mA)
EBP-34N NiCd battery pack (4.8V 1200mA)
EBP-35N NiCd battery pack (7.2V 900mA)
EBP-37N NiCd battery pack (4.8V 700mA)
EDC-36 Cigarette lighter cable with active filter
EDC-88 Rapid recharger (120/230VAC)
EME-6 Earphone
ESC-28 Soft case (for use with EBP-33N)
ESC-29 Soft case (for use with EBP-37N)
ESC-30 Soft case (for use with EBP-34N or EBP-35N)
EBC-6 Mobile bracket
EDC-37 DC cable for station use
T r o u b l e C a u s e R e m e d i a l a c t i o n
No sound is heard from
the speaker.
No signal can be
received.
The settings for
frequencies, etc. cannot
be performed.
The warning beep is
emitted or the sound is
distorted.
The display turns OFF.
The volume level is too
low.
The squelch level is too
high.
The antenna is not
properly set.
The key locking function
is active.
The battery has run out.
Press the VOL key on the left side of the
DJ-X2000, and then turn up the volume (see
page 19).
Press the SQL key on the left side of the
DJ-X2000, press the DOWN key to
decrease the level until any noise can be
heard, and then increase the level until
the noise is no longer heard (see page
20).
Properly attach the antenna (see
page 13).
Cancel the key locking function
(see page 27).
When appears on the display,
replace the battery.