Alinco DJ-X2000 - Manual (Page 83)

82
4. Appendix
4.1 Specifications
R a n g e o f
r e c e i v e d f r e q u e n c i e s
R e c e i v e d r a d i o t y p e
Memory channel
Search path memory
Priority channel
Memory banks
1-bank channel
Band search
Antenna connector
Frequency steps
Receiving sensitivity
※ Excluding the frequency band
for electric communication
business use
※ The typical sensitivity values
are shown here.
0.1MHz ∼2149.999950MHz
WFM, NFM, AM, USB, LSB, CW
2,000 channel
1,000 channel
1 channel (freely selectable from 2,000 channels)
50
40
20
BNC,50 Ω
AUTO STEP, 50Hz, 100Hz, 200Hz, 500Hz, 1kHz, 2kHz, 5kHz,
6.25kHz, 8.33kHz, 9kHz, 10kHz, 12.5kHz, 15kHz, 20kHz, 25kHz,
30kHz, 50kHz, 100kHz, 125kHz, 150kHz, 200kHz, 250kHz,
500kHz, USER STEP
(Only the digits of 1 MHz, 10 MHz, and 100 MHz can be changed.)
0.1MHz ∼5MHz
AM 1.5 μV (10dB S/N)
SSB/CW 0.6 μV (10dB S/N)
5MHz ∼900MHz
AM 1.0 μV (10dB S/N)
SSB/CW 0.5 μV (10dB S/N)
NFM 0.5 μV (12dB SINAD)
WFM 2.0 μV (12dB SINAD
when stereo signal are received)
900MHz ∼2150MHz
SSB/CW 1 μV (10dB S/N)
NFM 2 μV (12dB SINAD)
WFM 4 μV (12dB SINAD)
Approx. 200 g
57 ×150×27.5mm
–10
°
C ∼50
°
C(14
°
F ∼122
°
F)
4.8V DC (Ni-Cd), 7.2V DC (Ni-Cd), 6V DC
(AA battery)
10 ∼16V DC
min.100 mW, 10% THD
At rated output: Approx. 150 mA (when 6 V power source is used)
At standby: Approx. 100 mA
In BS mode: Approx. 50 mA
W e i g h t
E x t e r n a l d i m e n s i o n s
Operating temperature
P o w e r s o u r c e
External power source
R a t e d o u t p u t
C u r r e n t c o n s u m p t i o n
Note: The North American version cannot be used to receive any frequency for cellular phones.