Alinco DJ-X2000 User Manual

Page 74

Select the program bank in which you want to set a memory channel
for scanning.

Using the dial or

UP/DOWN

key, point the arrow at the

program you want to set. Press the

key.

Select the program number you want to assign to a memory channel.

Using the dial or

UP/DOWN

key, point the arrow at the

program number you want to select. Press the

key.

Select a memory bank.

Select a memory bank and then press the

key.

Using the dial or a numeric key, specify a memory bank
number (Pressing the

key toggles from bank groups

A through E). Move the arrow back to the position

pointing at the channel by pressing the

DOWN

key.

Select a memory channel.

Using the dial or a numeric key, specify a memory

channel number. Press the

key (To cancel the

setting, press the

key).

Repeat the above steps 2 through 5 to register all the channels on which you are
scanning, and then press the

key.

The display will return to the PMR BANK screen. Point the arrow at

END

and

then press the

key (Alternatively you may press the

key, and then

key while

is shown on the display).

ENT

CLR

SKIP

ENT

F TUNE

ENT

B ANK
B ANK 1

PMR

- - - - -

PG 1 - - - - -

MR BANK

A 2 - - - - . - - - -

- - - - - - - -

MR MEMORY

A 2

8 4 . 5

1 2

A BC

MR MEMORY