17 setting the scanning pause period – Alinco DJ-X2000 User Manual
Page 45
44
3
Select an S-meter level.
Point the arrow at
ON
using the
UP/DOWN
key. Select a level from 1 through 7
using the dial, and then press the
key. If you do not want to select any S-
meter level, select
OFF
and then press the
key (the initial setting is
OFF
).
Higher levels require stronger signals to stop scanning.
The display will return to the SCAN mode. Point the arrow at
END
and then
press the
key (Alternatively, you may press the
key, and then press
the
key while
is shown on the display).
Note:
If you exit the SCAN menu by pressing the
key, the changed setting is
canceled.
3.1.17 Setting the scanning pause
period
The scanning pause period for the TIMER option can be set.
1
Call up the SCAN menu.
Press the
key, and then press
the key
while
is
shown
on the display.
The MENU will appear. Point the
arrow at
+CONFIG
using the dial or
UP/DOWN
key, and
then press the
key.
The CONFIG menu will appear. Point the arrow at
+SCAN
and then press the
key.
The SCAN menu will appear.
2
Call up the BUSY TIMER screen.
Point the arrow at
+Busy Timer
and then press the
key.
The BUSY TIMER screen will appear.
3
Set the scanning pause period.
Set the scanning pause period using the dial or
UP/DOWN
key, and then press
the
key (the initial setting is 5s).
The display will return to the SCAN menu. Point the arrow at
END
and then
press the
key (Alternatively, you may press the
key, and then press the
key while is shown on the display).
Note:
If you exit the SCAN menu by pressing the
key, the changed setting is
canceled.
CLR
SKIP
F
ENT
TF
ENT
TF
ENT
TF
ENT
TF
ENT
TF
HELP
SET
MODE
AUTO MW
MIC
A-B S
M NAME
STEP
ATT
SET
POW
ER
PMS
VFO
MR M
W
A B
SET
KL
3
6
2
1
RF C
HELP
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP
CLR
SKIP
F
ENT
TF
ENT
TF
ENT
TF
ENT
TF
SCAN MODE
BUS Y T i me r
SCAN
B
5 s
u s y T i me r
ENT
TF
F