Basic operations, 1 power switch, 2 volume control – Alinco DJ-X2000 User Manual
Page 20
19
2. Basic operations
This chapter describes the basic operations for the DJ-X2000.
2.1 POWER switch
To turn ON/OFF the DJ-X2000, perform the following operation:
• Turning ON
Hold down the POWER switch for approx. 1 second until
the message “ALINCO INTELLIGENT RECEIVER™”
appears on the display.
• Turning OFF
Hold down the POWER switch until the display goes out.
Note:
The message that appears on the display may be changed (see “3.1.12
Changing the initial message” on page 40).
2.2 Volume control
To turn up the volume, press the
VOL
key located on the left side of
the body, and then press the
UP
key or turn the dial clockwise. To
turn down the volume, press the
VOL
key, and then press the
DOWN
key or turn the dial
counterclockwise.
The
bars on the display will increase/decrease with
the adjacent number changed between V00 and V32 as
you control the volume.
Note:
To disengage the squelch (the mute function) temporarily, press and hold
the
key on the left panel. This will enable you to set the volume setting
without changing the squelch setting (see “2.3 Squelch control” page 20).
MONI
POW
ER
PMS
VFO
MR M
W
A B
SET
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP
POW
ER
RX/S
T
PMS
VFO
MR M
W
A B
SET
MONI
F
SRCH
SQL VOL
P
V
A
1 4 5 . 3 4
b
8
.
1 6