11 turning beep on/off – Alinco DJ-X2000 User Manual
Page 27

26
2
Select a backlight mode as follows:
Using the dial or
UP/DOWN
key, point the arrow at a desired mode, and then
press the
key (the initial setting is the MOMENTARY mode).
AUTO:
The backlight is lit for 5 seconds after the dial or key is
used.
MOMENTARY:
The backlight remains lit only while the
key is being
held down.
ALTERNATE:
The backlight is turned alternately ON and OFF every time
the
key is pressed.
The display will go back to the CONFIG menu. Point the arrow at END, and then
press the
key (or alternatively, press the
key, and then press the
key with
shown on the display.
Note:
If you exit the CONFIG menu by pressing the
key, the changed
setting is canceled.
2.11 Turning beep ON/OFF
The beep sound that is emitted when a key is pressed or a specific operation is
performed can be turned ON/OFF and its volume can be controlled as follows:
1
Call up the BEEP screen.
Press the
key, and then press
the key
while
is
shown
on the display. The MENU will
appear. Point the arrow at
+CONFIG
using the dial or
UP/DOWN
key, and then
press the
key. The CONFIG menu will appear.
Point the arrow at
+BEEP
, and then press the
key.
The BEEP screen will appear.
2
Select a beep sound mode.
Using the dial or the UP/DOWN key, point the arrow at a desired mode, and then
press the
key (the initial setting is the HIGH mode).
OFF:
The beep sound is turned OFF.
HIGH:
The beep sound is emitted at a high level.
LOW:
The beep sound is emitted at a low level.
The display will go back to the CONFIG menu. Point the arrow at END, and then
press the
key (or alternatively, press the
key, and then press the
key while
is shown on the display.).
Note:
•If you exit the CONFIG menu by pressing the
key, the changed
setting is canceled.
• If stereo earphones are used, the beep sound can be heard from the left
earphone only.
CLR
SKIP
ENT
TF
F
ENT
TF
ENT
TF
ENT
TF
ENT
TF
HELP
SET
F
MODE
AUTO MW
MIC
SCRT
PRIO
CTCSS
A-B S
M NAME
TF
STEP
ATT
SET
POW
ER
PMS
VFO
MR M
W
A B
SET
KL
3
6
9
5
2
1
4
SCN
RF C
HELP
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP
CLR
SKIP
ENT
TF
F
ENT
TF
LAMP
LAMP
ENT
TF
H i g h
L OW
BEEP