Alinco DJ-X2000 - Manual (Page 18)

17
• Recharging procedure
1
Plug the AC power cord into the AC power
socket on the battery charger.
2
Insert the battery pack being recharged, along
the guides provided on both sides of the battery
charger. The lamp will be illuminated in red, and
quick recharge will be started.
3
When the quick recharge is completed, the lamp
changes its color to green, indicating that
supplemental recharge (*) has started.
4
About four hours after the quick recharge has
started, the lamp starts blinking in green,
indicating that the supplemental recharge has
been completed.
Note: The supplemental recharge means recharging the battery pack with a small
electric current to prevent its capacity from decreasing due to the self-
discharge. This does not overcharge the battery pack.
• Battery pack vs. recharging time
The battery packs applicable to each battery charger model and their
recharging time are shown below:
MODE
AUTO MW
INTELLIGENT RECEIVER
DJ-X2
MIC
SCRT PRIO
REC
CTCSS
F TUN E
A-B S
M NAM E
TF
SKIP
STEP ATT
SET
KL
3
6
9 8
0
5
2 1
4
CLR
ENT
MIC
SCN
RF C
HELP
7
LAMP
D O W N
Battery pack
EBP-33N
EBP-34N
EBP-35N
EBP-37N
EBP-47N
Battery capacity
4.8V 650mAh
4.8V 1200mAh
7.2V 900mAh
4.8V 700mAh
7.2V 700mAh
Recharging time
Approx. 1 hour
Approx. 1.5 hours
Approx. 1.2 hours
Approx. 1 hour
Approx. 1 hour