Alinco DJ-X2000 - Manual (Page 10)

9
5. (Function) key Use this key in combination with other keys to call up
specific functions.
6. key Temporarily cancels the squelch for the duration it is
held down. Used independent of squelch level.
7. key Press to start scanning within a 40-channel range. Use
in combination with
key to start scanning in a 7-
channel range.
8. key Turns the key backlight ON/OFF.
9. VOL/SQL key Use to adjust the audio volume and squelch level.
10. UP/DOWN key Use to set frequency, to adjust the audio volume and
squelch level, to control various settings, and to select
an item in the menu display.
11. POWER switch Turns power ON/OFF.
12. Hardware reset key Press to reset all functions to their factory-settings.
However, data stored in memory is not deleted.
Settings might return to the settings when power was
turned ON the last time.
13. Busy lamp Lights green when a signal is picked up and stays lit
while the signal is active. Lights orange when
receiving FM radio in stereo (using stereo earphones).
In Transceiver mode, lights red while transmitting.
14. Speaker Sound is produced from here.
15. key Shifts to the scan programming mode. If pressed in
combination with the
key, the scan program can
be saved in memory.
16. key Engages the dual VFO mode. If pressed in
combination with the
key, the frequency displayed
in the top band is copied to the bottom band.
17. key Use to access the memory. If pressed in combination
with the
key, frequencies and other data can be
saved in memory.
18. Display Displays frequency, operating status and other
information pertinent to use.
19. Key pad In the VFO mode, use these keys to directly input the
frequency you want. Press in combination with the
key to access other functions.
20. Built-in microphone Use to pick up sound and record it.
F
F
MRMW
F
A=B
VFO
F
PMS
SET
LAMP
F
SRCH
MONI
F