Appears on the display – Alinco DJ-X2000 User Manual
Page 22
21
Note:
If you enter any frequency that cannot be divided by the set frequency step,
“
S
” appears on the display.
• Setting with the UP/DOWN key
For higher frequencies, press the
UP
key. For lower
frequencies, press the
DOWN
key. The frequency will
increase/decrease in the set frequency steps.
Note:
For changing the frequency step, see “3.1.2 Setting the frequency step”
(page 32).
• Setting from the dial
For higher frequencies, turn the dial clockwise. For lower
frequencies, turn it counterclockwise. The frequency will
increase/decrease in the set frequency steps.
Note:
For changing the frequency step, see “3.1.2 Setting the frequency step”
(page 32).
• Setting with the combination of the
key and the dial
Press the
key, and then press the
UP/DOWN
key while
is shown on the display. An under-bar will appear at
the digit of 100, 10, or 1 MHz. Now turning the dial allows
you to change the number at that digit. Pressing the
UP/DOWN
key shifts the digit at which the number can be
changed.
F
MODE
M NAME
STEP
ATT
SET
POW
ER
RX/S
T
PMS
VFO
MR M
W
A B
SET
3
HELP
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP
CLN
S P
F
POW
ER
RX/S
T
S
F
CLN
S P
PMS
VFO
MR M
W
A B
SET
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP