ACTi Camera Firmware V.5.12.12 - Manual (Page 99)

www.acti.com
Firmware User ’s Manual V5.12.12
99
Column Description
System info
It shows the firmware version, MAC address, production ID, and factory
default type of IP device.
WAN status
It shows the WAN port’s IP address, netmask, gateway, DNS server,
DDNS host and connection status.
System log
It shows the system event. This column is very useful to as a diagnostic
tool. At the bottom of this area is the ISP firmware version, which is an
useful diagnostic parameter.
Click [Parameter List] to see all configurations of the IP device.
Click [Server Report] to export related information while reporting to your support channel.
Factory Default
Click the [Factory Default] item to display the “Factory Default Page”.
If you want to keep network settings and restore other settings to factory default, please select
the first option. If you select the second one instead, all the settings would be removed during
factory default. You will have to use factory default IP setting to connect to this camera. Please
refer to previous login section.
Click the [Apply] button to show a warning dialog that reminds you again before restoring the
device to factory default.