Event list – ACTi Camera Firmware V.5.12.12 User Manual

Page 74

Firmware User

’s Manual V5.12.12

Event List

You may define a maximum of 10 Event rules, which will be shown in abbreviated form in the

Event List panel. It will display under each Event ID, the days of the week it will be active, the

start time and duration of the active period, the type of the source of trigger, and the actions used

in the response. If the row is greyed out, this means the rule is currently not enabled and stays

inactive.

There are several parts to the Event rule:

When is it active?

You may choose to enable the rule or not

. The settings will be kept in internal memory even if

the event rule is disabled. Select the days in a weekly cycle

in which this rule and schedule

is active.

Determine the

start time and

duration of the active period. For example, a rule that lets

motion detection trigger snapshot uploads to FTP would only take place after 19:00 each day for

12 hours. Outside of this time the rule will not be active.