ACTi Camera Firmware V.5.12.12 User Manual

Page 42

Firmware User

’s Manual V5.12.12

3. Motion Detection Setup

Press to edit the settings. There are set six regions on ceiling mounting type

and three regions on wall mounting type.

STEP1:

Click the checkbox to enable motion detection for different preset point region

STEP2:

Choose the preset point you want to use.

STEP3:

Set the sensitivity of motion detection region.

STEP4

: Set the interval time of motion detection. After a motion event is triggered, no more

events will be triggered within this time in the same region

STEP5:

Set the trigger threshold of motion detection region. The larger this value, the larger

the object size needed to trigger motion detection.

STEP6

: Set the priority of these preset point to trigger the motion detection. The higher

number is the higher priority,

Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the

parameters.

Fisheye View

In Fisheye View mode, camera will provide the panorama view image, and the available video

resolution is 2032 x 1936.