ACTi Camera Firmware V.5.12.12 - Manual (Page 61)

www.acti.com
Firmware User ’s Manual V5.12.12
61
Parameters Description
Enable Check this box to enable each OSD / Privacy mask region
OSD / Privacy
mask
Each region can be in one of two types. OSD (On Screen Display) or
Privacy mask
Color (Privacy
mask)
This determines the color of the Privacy Mask Area. You may choose
between Black, Green, Red and Blue.
Setup
Click this checkbox to enable Privacy mask area setup. Click and drag
the adjust square at the lower right to change dimensions, click and
drag the adjust column at the top to move. (Similar to Motion Detection
Region)
Color(OSD)
This determines the color of the OSD Text. You may choose between
Black, Green, Red and Blue.
Transparent
This number determines the level of transparency for this OSD Text. 1
means that the background between the texts will not be visible, while
100 means the background will show through the OSD text.
Position Select the location where the text will appear in the image.
String
This is where you enter the user defined string (%U) as described in the
next section. Total length cannot be more than 63 characters
Format
This controls what is shown in the OSD text. You can click the Format
Notice to the corner for a full list of available parameters. The OSD text
is primarily based upon this field.
Format Notice Click here to see the syntax list of how to configure the OSD text.
Click the [Apply] button to confirm the settings or click the [Reset] button to re - enter
the parameters.