ACTi Camera Firmware V.5.12.12 - Manual (Page 10)

www.acti.com
Firmware User ’s Manual V5.12.12
10
STEP7
Click the “Use the following IP address” radio button and enter the IP address and the subnet
mask.
STEP8
Click the [OK] button and the window dialog box will close.
Please set the settings as below.
IP address: 192.168. 0.xxx
Subnet mask: 255.255.255. 0
( NOTE : xxx should be a number
from 1 to 254 except 100, which is
used by the IP device. Please also
make sure that no two equipments
use the same IP address in the
same network.)