ACTi Camera Firmware V.5.12.12 - Manual (Page 18)

www.acti.com
Firmware User ’s Manual V5.12.12
18
To set or modify a tour, do the following:
1. On Select a Preset Point , select a tour and then click Edit Tour .
2. Select a preset point from the list, set the duration (in seconds) of how long the camera
will stay in that point, and then click .
3. On the Preset Points , the preset points added to the Tour are listed.

To change the sequence of preset points, click the (first / up /
down / last) icons.

To directly go to a preset point, click the icon.

To delete a preset point from the list, click the icon.
4. Repeat the steps 2 and 3 to add more preset points to the tour.
5. On Pan/Tilt Speed , select the pan/tilt speed. The bigger the number the faster the speed
is.
6. Once done, click the Save button on Select a Preset Point .
7. On Touring Control , select the tour name to activate. Once activated, the camera will
start the tour.